A06B-0153-B075 servo motor

A06B-0153-B075 servo motor

Product Details Introduction

Installation of FANUC A06B-0153-B075 requires the use of a rigid flange bracket with a fixed torque of 150-180N · cm to ensure vibration free displacement during high-speed operation at 3000rpm.

Before wiring, confirm that the power supply voltage matches the rated 168VAC (200Hz) of A06B-0153-B075 to prevent overvoltage damage to the 4.8kW power level winding.

This model is compatible with FANUC A64 series drivers and requires hardware ID matching through system parameters to ensure torque and speed control accuracy.

The encoder signal line is separately wired using twisted pair shielded cables, with the joints locked in place to reduce electromagnetic interference and ensure stable signal transmission.

Regularly clean the A06B-0153-B075 casing with a dry cloth. The IP65 protection should focus on preventing dust and low-pressure spray water from entering, and avoiding damage to components caused by liquid contact.

The operating environment temperature should be controlled between -10 ℃ and+40 ℃. If the temperature exceeds the limit, the capacity should be reduced by 1.5%/℃ to avoid overheating during 30Nm torque output.

The installation of coupling components adopts hot sleeves or specialized fixtures, and uses straight shaft keyway positioning. It is forbidden to knock the shaft end to protect the precision bearings and shaft structure.

Tighten the wiring terminals with a torque of 1.2-1.5N · m, and crimp multiple wires with copper noses to prevent loosening and unstable power supply.

Every 12 months, check the insulation resistance of the winding to be ≥ 10M Ω, and clean the dust on the heat dissipation fins to ensure the heat dissipation efficiency during high-power operation.

Before restarting after being idle for more than 6 months, manually rotate the shaft to check its flexibility. After preheating for 30 minutes without load, gradually load it to the rated torque of 30Nm.

Summary: The stable operation core of FANUC A06B-0153-B075 servo motor lies in standardized installation, voltage matching, IP65 protection maintenance, and load adaptation. Relying on the characteristics of 4.8kW high power, 30Nm high torque, and high-speed precision control, it is suitable for automation scenarios such as small and medium-sized machine tools. With compliant operation, it can fully leverage its industrial grade reliability and positioning accuracy advantages.

A06B-0153-B075 Product imag

A06B-0153-B075 ontroller Module

SAT CM3142-01-03 CX3147-04 Industrial Control Card PLC/DCS Spare Module
SAT RM3141-01-02 robot card
STEC S83-1003-01 switch interface module

Other website links

3BHE043536R0001模拟输入/输出模块
Honeywell 51303932-476串行设备接口模块
Honeywell 51305348-100媒体适配器