JL4-0530-48-3R servo motor

JL4-0530-48-3R servo motor

Product Details Introduction

The installation of AB 2098-DSD-020X requires a panel installation method to ensure a smooth heat dissipation path and reserve a ventilation space of ≥ 8cm.

Before wiring, confirm that the input voltage is 100-240VAC single-phase and matches the rated input of AB 2098-DSD-020X.

AB 2098-DSD-020X supports indexing, point-to-point, and coordinated motion control, and mode switching requires configuration through Ultraware software.

The main circuit cable uses copper wires with an area of ≥ 1.5mm ², and the terminal tightening torque is controlled between 180-220N · cm to prevent poor contact.

Regularly backup AB 2098-DSD-020X parameters through RSNetWorx software to avoid configuration loss caused by misoperation.

The DeviceNet communication line needs to be wired separately and the terminal resistance should be standardized to reduce interference with AB 2098-DSD-020X signal transmission.

If AB 2098-DSD-020X reports an overcurrent fault during operation, first check the motor winding insulation and UVW phase sequence wiring.

When cleaning the drive, disconnect the power and wipe the outer shell with a dry cloth. Do not touch the internal circuit board and heat dissipation components.

AB 2098-DSD-020X is designed for passive heat dissipation, and the installation surface needs to be kept clean to avoid covering foreign objects that may affect heat dissipation.

Regularly check the encoder wiring and model matching to ensure consistency with the AB 2098-DSD-020X parameter settings.

The ambient temperature is controlled between -20 ℃ and+60 ℃, with a humidity of 5% -95% (no condensation), suitable for the working range of AB 2098-DSD-020X.

Do not plug or unplug connectors while the drive is running to prevent instantaneous current damage to the AB 2098-DSD-020X interface chip.

Optional fuses must comply with LPJ-20SP (Class J) or FNQ-R-20 (Class CC) specifications to ensure circuit safety.

When adjusting the parameters of the motion curve, it is necessary to combine AB 2098-DSD-020X 30A peak current limit to avoid overload.

After being idle for a long time and restarting, AB 2098-DSD-020X needs to be placed at room temperature and warmed up to confirm that there is no condensation before powering on.

Summary: The stable operation of AB 2098-DSD-020X servo drive requires a focus on standardized installation, compliant wiring, software configuration, and environmental adaptation, with a particular emphasis on communication line wiring, heat dissipation assurance, and root cause troubleshooting. It fully leverages its DeviceNet networking advantages and precise control performance at 2kW power levels to extend equipment lifespan.

JL4-0530-48-3R  Product imag

JL4-0530-48-3R  ontroller Module

HIMA  F3226A输入模块
HONEYWELL SC-UCMX01 51307195-175  混合I/O模块
Motorola MVME167-33B工业控制系统

Other website links

HONEYWELL SC-UCMX01 51307195-175  混合I/O模块
Motorola MVME167-33B工业控制系统
TRICONEX  3704E模拟输入模块