AKM62K-ANCNDA0 servo motor

AKM62K-ANCNDA0 servo motor

Product Details Introduction

When installing Kollmorgen AKM62K-ANCNDA0, the coaxiality between the motor and the load should be ≤ 0.1mm to reduce the impact of operating vibration and cogging effect.

Handle the motor body tightly during transportation, and it is strictly prohibited to grip the encoder end or connector of AKM62K-ANCNDA0 to avoid damaging precision components.

Kollmorgen AKM62K-ANCNDA0 supports position/speed/torque three mode control, and the switch needs to be configured through AKD series drives.

When wiring, separate the encoder signal line from the power cable to reduce electromagnetic interference and ensure stable AKM62K-ANCNDA0 signal transmission.

Regularly clean the encoder window of Kollmorgen AKM62K-ANCNDA0, with a focus on preventing dust intrusion for IP40 standard protection models.

The operating environment temperature is controlled between -20 ℃ and+40 ℃, suitable for the thermal design requirements of AKM62K-ANCNDA0 F-class insulation (155 ℃).

The motor bearings are designed with maintenance free sealing and do not require additional lubrication to avoid disassembly and damage to the protective seals.

Avoid applying excessive axial loads to Kollmorgen AKM62K-ANCNDA0 to protect the service life of the shaft system and bearings.

The tightening torque of the terminal block should be controlled between 120-150N · cm to prevent looseness from causing unstable power supply to AKM62K-ANCNDA0.

The bending radius of the supporting cable shall not be less than 10 times the diameter of the cable, and the IP67 waterproof model shall prevent the cable joint from being immersed in water.

If the shell temperature of Kollmorgen AKM62K-ANCNDA0 exceeds 85 ℃ during operation, the machine needs to be stopped to check the load and heat dissipation.

Disassembling the coupling components requires the use of a specialized puller, and it is forbidden to strike the shaft end to protect the keyway structure of AKM62K-ANCNDA0.

Regularly verify the integrity of the encoder wiring to ensure compatibility with the high-precision feedback function of AKM62K-ANCNDA0.

The surface of the motor needs to be kept clean, and dust should be removed with compressed air to ensure the heat dissipation efficiency of the F-class insulation winding.

After being idle for a long time and restarting, it is necessary to first check that the insulation resistance of the winding is ≥ 5M Ω, and then gradually test run it at the rated speed.

Summary: The stable operation core of Kollmorgen AKM62K-ANCNDA0 servo motor lies in precise installation, standardized protection, and environmental adaptation, with a focus on coaxiality control, encoder protection, insulation heat dissipation, and load matching. It fully utilizes its advantages of low cogging torque, high power density, and industrial reliability to extend the overall service life of the equipment.

AKM62K-ANCNDA0  Product imag

AKM62K-ANCNDA0  ontroller Module

B&R 8AC110.60-2 driver card
B&R 8AC120.60-1 Servo drive card
BRAKE BCC-1 Brake control card

Other website links

Motorola MVME167-33B工业控制系统
TRICONEX  3704E模拟输入模块
REXROTH VT-VPCD-1-16/V0/1-P-1 R901089559放大器模块