KJ4003X1-BB1 vertical bracket

KJ4003X1-BB1 vertical bracket  

Product Details Introduction

KJ4003X1-BB1 is a right side 8-slot VerticalPLUS vertical I/O bracket specifically designed for Emerson DeltaV distributed control systems. It is used for high-density installation of I/O modules in industrial automation scenarios, achieving stable connection between fieldbus and system host. It supports compliant deployment in hazardous areas and is suitable for process industry DCS system expansion and transformation.

Product Features

Adopting the standard design of 8-width on the right side, it can be paired with KJ4003X1-BA1 on the left side to form a symmetrical vertical I/O array, suitable for various cabinet layouts.

Equipped with VerticalPLUS dedicated architecture, following the standard power-off plugging process, improving system maintenance and replacement efficiency.

Configure dual power supply, providing 12.6 VDC/15A local bus power and 30 VDC/13A field circuit power to meet module and field instrument power supply needs.

Equipped with ATEX and FM explosion-proof certifications, it can be applied to Zone 2/Class I Div 2 hazardous industrial sites.

Working temperature range -40 ° C to+70 ° C, suitable for extreme high and low temperature industrial site environments.

Meet strict anti vibration and anti impact standards, and can operate stably around equipment with mechanical disturbances.

Supports non condensing humidity environments ranging from 5% to 95%, with an IP20 protection level, suitable for humid industrial environments without water spray.

Compliant with ISA-S71.04 G3 pollution level, resistant to industrial pollutants such as dust and oil pollution erosion.

Combined with LocalBus extender, the total length of the bus does not exceed 6.5 meters, ensuring stable signal transmission.

The whole machine has no user repairable parts, and the sealed structure reduces maintenance operations and the risk of malfunctions.

Compatible with the entire range of DeltaV I/O modules and KJ4006 series terminal blocks, supporting mixed installation of standard and SIS I/O.

Cross cabinet connections require conduit wiring to effectively reduce electromagnetic interference and physical damage.

The empty space of the bracket needs to be equipped with KJ4001X1-FA1 cover plate to ensure the integrity of the overall structure and protection.

Produced by the original factory, with complete serial numbers and product information labels, providing standard warranty services.

Vertical installation structure optimizes cabinet space utilization and is suitable for upgrading and renovating old DCS systems.

ending

KJ4003X1-BB1 is widely used in process industries such as petrochemical, power, coal chemical, and papermaking due to its stable electrical performance, compliance with explosion-proof certification, and strong environmental adaptability. Installation and commissioning must strictly follow the DeltaV hardware manual and hazardous area specifications to ensure long-term safe and stable operation of the system.

KJ4003X1-BB1 Product imag

KJ4003X1-BB1 ontroller Module

3ASC25H204 DAPU100 Digital Flow Counting Module
3ASC25H214 DATX130 rotor feedback board
DATX131 3ASC25H215 CPU Digital Output Board

Other website links

KSD211B 3BHE022455R1101输入耦合单元
GFD563A102 3BHE046836R0102中央控制器模块
DSCA190V 57310001-PK通信处理器