Oriental A6346-043-A4-1 Driver

Oriental A6346-043-A4-1 Driver 

 Introduction

Oriental A6346-043-A4-1 closed-loop stepper driver, used for automated precision positioning workstations.

Product Features:

1. Open loop closed-loop hybrid control, overload automatic closed-loop compensation, to prevent step loss

2. No need for complex gain debugging, easy to debug in load fluctuation scenarios

3. Compatible with a battery free absolute value encoder, no need to return to the original point after power failure

4. Low speed operation with minimal vibration and stable positioning

5. Pulse and RS485 dual-mode control, compatible with various PLCs

6. Integrated multiple fault protection, capable of outputting alarm signals

7. The software can set torque limits to protect the mechanical mechanism

8. Short stroke response is fast, suitable for high-frequency reciprocating motion

9. Plug in wiring, easy to disassemble and maintain

10. Compact body, saving installation space for control cabinets

Product Parameters:

1. Communication: RS-485, Modbus RTU protocol

2. Control signal: differential pulse input, register communication control

3. Compatible motor: 42 frame alpha STEP closed-loop stepper motor

4. Protection: overcurrent, overvoltage, overheating, encoder abnormality

5. I/O: Multiple digital inputs and outputs, supporting in place and enable signals

Oriental A6346-043-A4-1 balances step response and closed-loop error correction, and is commonly used for detection and transplanting automation equipment.

Product imag

ontroller Module

METSO IOP313 Pulse input module
IS200AEADH4ADA Gas turbine module
IS210AEBIH1BED Gas turbine module

Other website links

PROSOFT MVI56-MCM 主/从通信模块
BCU-02 电动阀门控制器
AB 1794-ACNR15XT/D 适配器模块