AEG MODICON AS-P892-000 Input/Output Module

AEG MODICON AS-P892-000 Input/Output Module

Product Details Introduction

Multi channel hybrid design, integrated digital input/output dual function, no need for split configuration, suitable for composite control scenarios.

The input channel supports free switching between dry/wet contacts, compatible with passive sensors and active signals, and has flexible and unrestricted on-site wiring.

The output channel adopts a relay contact design, with a single current carrying capacity of 5A, which can directly drive high-power loads such as small motors and solenoid valves.

Native compatibility with Modicon 984 series controllers, direct connection of backplane bus without adapter, zero adaptation cost for upgrading old systems.

Equipped with a built-in 1500Vrms signal isolation circuit, the input/output/power supply are isolated from each other, and the anti electromagnetic interference capability is industry-leading.

The working temperature covers a wide temperature range of -20 ℃~70 ℃, with a humidity tolerance of 5%~95% without condensation, and stable operation under extreme working conditions.

Channel response time<10ms, high-frequency signal acquisition and command output without delay, suitable for high-speed start stop control requirements.

35mm DIN standard rail installation, snap on quick fix, single person can complete disassembly and assembly, maintenance efficiency increased by 50%.

Dual protection of power reverse connection and overcurrent fuse to avoid permanent damage to the module caused by wiring errors or abnormal load.

Support module level address dialing settings, no software configuration required, plug and play, shorten system debugging cycle.

The status indicator light adopts a dual color design, with power/communication/channel fault color separation display, and accurate fault location to a single channel.

Compatible with Modbus RTU communication protocol, it can remotely monitor channel status through the upper computer and achieve centralized operation and maintenance management.

The narrow structure design only occupies 3 installation positions, allowing for compact layout in high-density control cabinets and increasing space utilization by 30%.

As a core spare part of the 984 series existing system, replacing the old I/O module does not require any program changes, and the downtime for replacement is less than 15 minutes.

Adapt to multiple scenarios such as machine tool control, assembly line linkage, storage equipment, HVAC, etc., with both universality and reliability.

AEG MODICON AS-P892-000  Product imag

AEG MODICON AS-P892-000  Controller Module

GE F650CFBF1G0HI10NBA Digital Tracheal Controller
IS215ACLEH1B Turbine Control Module
AMAT AX-7670 0190-47768 Generator

Other website links

GJR2312200R1010数字 I/O 模块
GJR2390200R1010控制卡
GJR2395400R1010模拟输入模块

PC842-XYZ-N	6SC6500-0NA04	NTHS03
PC842-XYZ-F	Gespac GESSBS-4 GESSBS-6A GESSIO-1E	NTRO02
PC842-XYZ-A	Gespac INC-1	NKHS03-15
PC842-001-T	Gespac CI0-1B	PHARPSCH100000
PC842-001-N	Gespac SI0-1E	HESG332181R0001 70BL02D-S
PC842-001-F	Gespac GESVIG-4VME	NTCL01