KEBA K2-400 SC440/A Communication Module

KEBA K2-400 SC440/A Communication Module

Product Details Introduction

The KEBA K2-400 SC440/A communication module * * is a key module used in the KEBA automation system for industrial communication between the main control unit and external devices, supporting multiple communication protocols and fieldbus connection methods. This module is widely used in injection molding machines, packaging machines, robot systems, and automated production lines as a bridge for data exchange and instruction transmission.

Technical parameters:

Module type: Industrial Communication Expansion Module

Interface type: Supports RS-232/RS-485, CAN, Ethernet (depending on specific configuration)

Communication protocol: Supports Modbus RTU, CANopen, EtherNet/IP, PROFIBUS DP, etc

Data transmission rate: up to 12 Mbps (depending on interface type)

Power supply: Powered by the control system motherboard (usually 5V or 24V DC)

Installation method: plug-in or backplate installation, compatible with KEBA KeControl series

Module size: Standard industrial size, easy to integrate into control cabinets

Working environment temperature: 0 ° C to+50 ° C

Electrical isolation: Each communication port has electrical isolation to enhance anti-interference capability

Status indication: LED indicator light displays communication status and fault information

Application areas:

1. Injection molding and molding equipment communication system

Used for data exchange between the main controller and temperature control modules, drivers, valve islands, and I/O expansion modules.

Realize efficient coordination of various components within the control loop.

2. Packaging and Conveyor Automation System

Connect external devices such as sensors, actuators, and vision systems to achieve fast communication response.

Used to synchronize the status, location, and instructions of multiple devices.

3. Robot integrated system

Support communication with multiple brands of PLCs, drivers, and SCADA systems.

Provide high-speed and stable fieldbus connections.

4. MES/ERP system data access

Realize data bridging between on-site control system and factory information management system.

Support uploading device operation data through Ethernet or serial port.

5. Industrial gateway and remote monitoring

As a gateway module, it bridges multiple communication standards, facilitating remote access and operation of the system.

Product imag

Related website links

DELTA TAU ACC-24E2 interface simulation

ALSTOM 3EST125-975 DCC2382A Control Pane

Asea 2668-184-280 12 slot control board

Other website links

ABB 3DDE300417 变频器模块

ABB  ACS-RTAC-01 64610805接口模块

ABB CHBX01R 2VAA008575R1 冗余模块底座