Nikon 4S025-567 Driver PCB Card

Nikon 4S025-567 Driver PCB Card 

 Introduction

Nikon 4S025-569 is an ACP-420 driver PCB card, compatible with NSR-S620D immersion lithography machine, responsible for optical unit drive control.

1. Output high-speed driving signals to control the actions of the optical execution components of the machine;

2. Equipped with signal filtering to reduce electromagnetic interference in the optical drive circuit;

3. Real time collection of driver load status, triggering fault alarms in case of abnormalities;

4. Standard CPCI slot board, easy to replace and maintain;

5. Support high-speed data exchange

Nikon 4S025-567 driver PCB card, model IUDRV2-X8A, compatible with NSR-S620D immersion lithography machine, controls internal actuator drivers.

1. Output driving signals to control the precision execution components of the immersion unit;

2. Equipped with signal shielding to reduce electromagnetic interference near the optical path;

3. Real time monitoring of load status, triggering alarms for abnormalities;

4. CPCI slot board, easy to disassemble and maintain;

5. High speed data exchange with the main control board.

1. Nickname IUDRV2-X8A;

2. Compatible with NSR-S620D immersion lithography machine;

3. Board type driver PCB;

4. Bus CPCI;

5. Install in the cabinet slot.

1. Drive control of immersion unit mechanism in lithography machine;

2. Action output of immersion liquid related execution components;

3. Drive the small fine-tuning mechanism of the cavity;

4. Drive circuit status acquisition and monitoring;

5. Immersion lithography equipment driver control board.

This 4S025-567 is a dedicated driver board for immersion units, ensuring stable operation of the immersion system.

4. Bus CPCI;

5. Working environment inside the cabinet.

1. Optical component drive signal output of lithography machine;

2. Exposure light path fine adjustment mechanism control;

3. Monitoring the load status of optical units;

4. Signal transmission of optical drive circuit;

5. Immersion lithography machine optical drive unit.

This 4S025-569 is a lithography machine optical system driver board, which directly affects the stability of optical path adjustment.

Product imag

ontroller Module

140ARI03010 processor module
1C31223G01 Input/output module
BENTLY 9200-06-01-10-00 vibration probe

Other website links

YT204001-KA/5 电压信号调节器
ELAU C200/10/1/1/100 驱动器
A-B 1797-PS2E2 防爆电源