TEL AP9E-0318C-12 Input/Output Module

TEL AP9E-0318C-12 Input/Output Module 

Product Details Introduction

TEL AP9E-0318C-12 Input/Output Module Product Features

TEL AP9E-0318C-12 is a servo I/O board specifically designed for ACT12 semiconductor machines, dedicated to axis control signal acquisition and drive output, and suitable for etching thin film equipment.

Specially designed for TEL ACT12 series equipment, with high matching of servo axis control signals

Multiple independent digital input channels for precise acquisition of limit and origin sensing signals

Multiple high-speed digital output ports, directly connected to Yaskawa servo drive control shaft body

Industrial grade gold finger slot, stable insertion and removal, not prone to poor contact during long-term use

Built in signal filtering circuit to isolate high-frequency electromagnetic interference from the machine

Onboard fault status indicator light, quickly locate channel disconnection or short circuit faults

Integrated hardware overcurrent and overvoltage protection to prevent servo impact damage to the board

Real time synchronized axis feedback data to ensure the accuracy of multi axis linkage motion

Onboard storage chip, retains axis control parameters without the need for repeated debugging when powered off

Standard industrial control board size, can be directly inserted into the equipment card slot without the need to modify the cabinet

Low latency signal transmission, shortening servo response lag time

Corrosion resistant PCB substrate, suitable for semiconductor cleanroom conditions

Channel independent isolation design, single channel failure does not affect other signal circuits

Supports device bus communication and can be connected to the upper computer for unified monitoring of I/O status

Factory calibrated signal threshold, ready for mass production on the machine

TEL AP9E-0318C-12 input/output module is a semiconductor equipment multi axis motion control core board, ensuring continuous and stable production on the production line.

Product imag

ontroller Module

PFTL301E 3BSE019050R1000 1.0kN pressure sensor
Bently 3500/32M 149986-02 Relay Module
PIONEER MAGNETICS PM3328B-6-1-3-E 80026-524-01 power module

Other website links

ICS TRIPLEX T8151C 通信接口模块
UFC760BE142 3BHE004573R0142控制器模块
PFCL201CE 50KN 3BSX802939-108张力控制器